BH GSO ASTM D7297:2022
Bahraini Standard
Current Edition
·
Approved on
28 April 2022
·
Standard Practice for Evaluating Residential Indoor Air Quality Concerns
BH GSO ASTM D7297:2022 Files
English
28 Pages
Current Edition
Reference Language
BH GSO ASTM D7297:2022 Scope
1.1 This standard practice describes procedures for evaluating indoor air quality (IAQ) concerns in residential buildings.
1.2 The practice primarily addresses IAQ concerns encountered in single-family detached and attached (for example,
townhouse or duplex design) residential buildings. Limited
guidance is also included for low- and high-rise multifamily
dwellings.
1.3 The IAQ evaluation procedures are comprised of interviews with the homeowner or resident(s) (including telephone
interviews and face-to-face meetings) and on-site investigations (including walk-through, assessment, and measurements). For practicality in application, these procedures are
divided into three separate phases, which may occur over one
or more site visits.
1.4 The procedures described in this standard practice are
aimed at identifying potential causes contributing to the IAQ
concern. Such findings should become a basis for recommending corrective measures. This standard practice does not
describe problem resolution or corrective measures and the
standard is not intended to evaluate the impact of corrective
measures.
1.5 This practice describes a pathway for characterizing
indoor air, though adherence to this practice does not guarantee
that an investigator will be able to identify or resolve an IAQ
complaint for one or more of the following reasons: (1) the
diversity of sources and contaminants in indoor air; (2) other
factors that may affect occupant perception and acceptance of
indoor air quality, such as air temperature, humidity, noise,
lighting, and psychological stress; (3) the range of susceptibility in the population.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls
Recently Published from Construction and Building Sector
GSO ASTM C990:2024
ASTM C990:09(2019)
Gulf Standard
Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
GSO ISO 12241:2024
ISO 12241:2022
Gulf Standard
Thermal insulation for building equipment and industrial installations — Calculation rules
GSO EN 772-11:2024
EN 772-11:2011
Gulf Standard
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
GSO ASTM C778:2024
ASTM C778:21
Gulf Standard
Standard Specification for Standard Sand